Furniture Test DAQ Software & Closed-Loop Control Guide

Q: What data acquisition and analysis capabilities does your testing software provide?

Derui DR-J series furniture testing software features a high-speed PLC-based Data Acquisition (DAQ) system operating at 200 Hz with 24-bit ADC resolution. Capabilities include real-time force-displacement curve plotting, automated peak/valley detection, ISO 17025 audit trail compliance, power-loss NVRAM recovery, one-click PDF/Excel report generation, and LIMS/ERP API integration.

Q: What data acquisition and analysis capabilities does your testing software provide?

DATA ACQUISITION & CONTROL SOFTWARE SPECIFICATION

Q: What data acquisition and analysis capabilities does your testing software provide?

A: All Derui DR-J series furniture testing machinery operates on an industrial-grade **PLC-based closed-loop control system** paired with an intuitive Windows PC software suite. Engineered specifically for ISO/IEC 17025 accredited laboratories and high-volume production QA, the system delivers high-speed Data Acquisition (DAQ), dynamic real-time plotting, and automated audit-ready compliance reporting.

1. Software Data Acquisition & Analytical Feature Matrix

Software / DAQ Feature Module	Technical Specification & Hardware Basis	Engineering Application & Laboratory Value
High-Speed Sampling & DAQ Rate	200 Hz (5 ms) Sampling Rate / 24-bit ADC Resolution	Captures instantaneous peak dynamic force spikes and transient structural yield without signal aliasing.
Real-Time Curve & Hysteresis Plotting	Multi-axis Load vs. Displacement & Load vs. Time curves	Automatically calculates hysteresis energy loss and foam firmness degradation during ASTM D3574 IFD testing.
Automated Pass/Fail Threshold Logic	Programmable upper/lower tolerance envelopes (±2% limit)	Auto-triggers machine safety shutdown when seat sag exceeds limits or when load cell registers zero resistance (specimen breakage).
ISO 17025 Audit Trail & Data Security	Encrypted SQLite database + User Role Management (Operator/Admin)	Tracks operator ID, calibration status, timestamped parameters, and raw data logs to prevent manual data tampering.
Hardware NVRAM Power-Loss Recovery	PLC Non-Volatile Memory auto-saves cycle state every 1 sec	Allows seamless test resumption from exact cycle interruption point after facility power outages without data loss.
LIMS / ERP System Integration	Automated CSV/Excel export + Optional RESTful API / Webhooks	Directly pushes batch test summaries to enterprise quality dashboards (SAP, MES, LIMS) for factory-wide QA visibility.

2. Advanced Historical Overlay & Batch Comparative Analytics

Quality control engineers and R&D managers utilize the software’s advanced trend analysis engine to optimize raw material supplier selection and prototype engineering:

Multi-Run Curve Overlay: Graphically overlay up to 10 historical test runs on a single screen to evaluate batch-to-batch consistency in polyurethane foam density or spring coil fatigue life.
Automated Hysteresis Loss Calculation: During foam Indentation Force Deflection (IFD) testing on the DR-J801 Foam IFD Tester, the software automatically computes initial 25%/65% IFD values, support factor ratios, and hysteresis energy dissipation percentages per ISO 2439.
Continuous Sag Tracking: Tracks progressive displacement loss during 300,000-cycle BIFMA X5.1 Section 8 fatigue runs, predicting structural component lifetime before catastrophic failure occurs.

3. One-Click Audit-Ready Report Generation

Generating formal compliance documentation requires only a single click. The built-in report generator creates non-editable PDF or structured Excel spreadsheets containing:

Complete Traceability Header: Machine serial number, operator name, specimen batch ID, ambient temperature/humidity, and sensor calibration expiration date.
Graphical & Tabular Data: Embedded high-resolution force-displacement curves alongside statistical summaries (Mean, Peak Force, Standard Deviation, Max Deflection).
Clear Certification Stamp: Automated “PASS / FAIL” compliance verdict based on pre-set standard rules (EN 12520, EN 16139, BIFMA X5.1, ISO 7173).

🔒 Enterprise LIMS & Quality Network Integration:

For modern smart factories operating centralized Laboratory Information Management Systems (LIMS) or ERP networks, Derui software supports automated database sync via local network (LAN) TCP/IP connection or RESTful Webhook APIs. Raw test data is automatically backed up to central enterprise servers upon test completion, ensuring 100% data integrity for ISO 17025 accreditation audits.

Discover Derui machines equipped with the advanced DAQ control suite:

DR-J501 Multi-Station Sofa Tester: Multi-axis synchronized closed-loop PID pneumatic control software.
DR-J609 Chair Seat & Backrest Tester: Dual-axis BIFMA/EN automated curve plotting suite.
DR-J103 Mattress Rollator Tester: Laser surface profile mapping and EN 1957 hardness rating software.

To review complete software interface screenshots, DAQ architecture diagrams, and CAD utility layouts, download our full Turnkey Furniture Testing Laboratory Engineering Handbook →